It’s particularly important to avoid detergents or cleaning products, as these can damage the vacuum..
only the pre-motor filter can be washed on the V7.You shouldn’t wash the post-motor filter.
If the post-motor filter has become clogged with dirt, the only option is to replace it..Unplug the vacuum and make sure you’re not holding down the trigger..Remove the pre-motor filter by lifting it out of the top of the main body..
Rinse the pre-motor filter in cold water until the water runs clear, then tap out any loose dirt.Never use hot water or a washing machine for this step..
Gently squeeze out excess water by twisting the filter to speed up the drying time..
Allow the filter to completely dry for at least 24 hours before replacing it back into the machine.. As a general rule, you should clean the pre-motor filter of the Dyson V7 at least once per month.Before You Get Started….
Always test cleaning products or detergents on a small patch of hidden carpet.You never know how a particular carpet will react to a new detergent, so it’s important to check that there isn’t any discolouration..
If possible, treat a coke stain (or any other stain) immediately after it happens.This reduces the amount of time for the coke to seep deeper into carpet fibres..